R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Tail Lamp: Service and Repair
Tail Lamp
Tail Lamp
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] See: Service Precautions.
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into 0 position.
-
Remove the rear wheel housing liner.
-
Remove the bumper cover.
-
Remove the bolts - arrows -.
-
Remove the left and right tail lamp cover - 1 -.
-
Remove the nut - 4 -.