R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-2739002.png)
Engine Compartment Lamp
Removing
-
Press in the retaining tab - 1 - with a flat-head screwdriver and pry out the engine compartment lamp (W27) - 2 -.
-
Disconnect electrical connector - 3 -.
-
Remove the bulb - 1 - (12V, 3W) on the rear of the engine compartment lamp from the socket - 2 -.
Installing
Install in reverse order of removal, observing the following:
‹› If the engine compartment lamps are LEDs, they must be completely replaced if they are faulty.
-
Insert the engine compartment lamp into the opening and engage it on the opposite side.
Engine Compartment Lamp Mount
Removing
