R8 Quattro Coupe V10-5.2L (BUJ) (2010)
5
Idler Roller Cover
6
Bolt
‹› 22 Nm
7
Bolt
8
Generator
9
Bolt
‹› 42 Nm
10
Generator Bracket
‹› Removing and installing, refer to => [ Generator Bracket ] See: Generator Bracket
11
Alignment Bushing
‹› For generator bracket
‹› 2 pieces
12
Idler Roller for Ribbed Belt
13
Vibration Damper with Ribbed Belt Pulley
‹› Removing and installing, refer to => [ Vibration Damper with Ribbed Belt Pulley ] See: Engine, Cooling and Exhaust/Engine/Cylinder Block
Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair
‹› The bolts must be replaced each time they are loosened
14
Bolt
‹› Replace
‹› Insert bolts that are not self-locking with locking compound.
‹› Tightening specification and sequence
Vibration Damper, Tightening Specification and Sequence
‹› Each time the bolts are loosened, the vibration damper must be replaced.
‹› Replace the bolts, which are being tighten with an additional turn, with new original bolts.