R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Fluid - Transfer Case: Service and Repair
Oil Level in Front Final Drive, Checking
Special tools, testers and auxiliary items required
‹› Oil Collecting and Extracting Device (V.A.G 1782)
Procedure
-
Place the Oil Collecting and Extracting Device (V.A.G 1782) underneath.
-
Remove the oil filler plug - 1 -.
‹› Oil level is correct when the front final drive is filled up to lower edge of oil filler hole.
-
Add axle oil if necessary.
-
Install the oil filler plug - 1 - with a new seal.