R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Fuse Block: Service and Repair
Right Rear Fuse Panel Baseplate
Right Rear Fuse Panel Baseplate
Removing
-
With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and
Charging/Tools and Equipment/Battery, Disconnecting and Connecting.
-
Remove the rear shelf.
-
Remove the bolts - 2 and 5 -.
-
Remove the right rear fuse panel baseplate - 4 - from the retainer - 3 -.
-
Release the retaining clips - arrows - and press the fuse panels - 1 and 6 - back and out of the baseplate.
-
Remove the fuses from the fuse panel.
-
Release retaining clips - arrows - and remove the cover from the fuse panel.
-
Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.