R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Remove the fuses from the fuse panel.
-
Release retaining clips - arrows - and remove the cover from the fuse panel.
-
Remove connector retaining strip - 1 - - arrow - and remove connectors from plug-in socket.
‹› Check the exact assignment for the passenger footwell fuse panel in the current wiring diagram.
Installing
‹› Tightening specifications, refer to => [ Front Relay Carrier and Fuse Panel Assembly Overview ] See: Front Relay Carrier and Fuse Panel
Assembly Overview
Install in reverse order of removal, observing the following:
-
Install the vehicle electrical system control module. Refer to => [ Vehicle Electrical System Control Module ] See: Power and Ground
Distribution/Power Distribution Module/Service and Repair.
-
Install the passenger footwell relay carrier base plate. Refer to => [ Relay Carrier and Fuse Panel, Passenger Side ] See: Relay Carrier and Fuse
Panel, Passenger Side.
-
Connect battery. Required actions => [ Connecting ] See: Starting and Charging/Tools and Equipment/Battery, Disconnecting and Connecting.