R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Relay Box: Service and Repair
Right Rear Relay Carrier
Right Rear Relay Carrier
Removing
-
With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and
Charging/Tools and Equipment/Battery, Disconnecting and Connecting.
-
Remove the rear shelf.
-
Remove the bolts - arrows -.
-
Remove the relay carrier - 1 -.
-
Remove the relay - C - and control modules - B - from the relay carrier.
-
Unclip the corresponding socket auxiliary fuse panel - A -.
-
Release all retainers - A arrows - and - B arrows -.
-
Remove the right rear relay carrier.
Installing
‹› Tightening specification, refer to => [ Rear Relay Carrier and Fuse Panel Assembly Overview ] See: Rear Relay Carrier and Fuse Panel Assembly