R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Coolant Line/Hose: Service and Repair
Rear Coolant Line
Rear Coolant Line
Special tools, testers and auxiliary items required
‹› Drip Tray (VAS 6208)
‹› Hose Clip Pliers (VAS 6340)
Removing
-
Remove the right coolant supply pipe. Refer to => [ Right Coolant Supply Pipe ] See: Right Coolant Supply Pipe.
-
Place the (VAS 6208) under the separating point.
-
Loosen the hose clamps - arrows - and remove the coolant hoses from the rear coolant return pipe.
-
Remove the bolts - 1 - and - 3 - and remove the rear coolant return pipe upward.
‹› Ignore - 2 -.
Installing
‹› Tightening specifications, refer to => [ Coolant Pipes Assembly Overview ] See: Coolant Pipes Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Install the right coolant supply pipe. Refer to => [ Right Coolant Supply Pipe ] See: Right Coolant Supply Pipe.