R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-328006.png)
‹› In the passenger compartment over the center tunnel.
18
Refrigerant Line
‹› Return from evaporator to the reservoir.
‹› In the passenger compartment over the center tunnel.
19
O-ring Seals
‹› For the refrigerant lines.
‹› Replace.
‹› Lubricate lightly with refrigerant oil before installing.
20
Refrigerant Line
‹› Return from evaporator to the reservoir.
‹› In the passenger compartment over the center tunnel.
21
Screw
‹› Tightening specification 9 Nm.
22
Refrigerant Line
‹› Supply from condenser 2 (right) to the evaporator.
‹› In the passenger compartment over the center tunnel.
23
Refrigerant Line
‹› Return from evaporator to the reservoir.
‹› In the center tunnel.
24
O-ring Seal
‹› For the refrigerant lines
‹› Replace.
‹› Lubricate lightly with refrigerant oil before installing.
25
Screw
‹› Tightening specification 9 Nm.
26
Refrigerant Line
‹› Return from evaporator to the reservoir
‹› in the center tunnel
27
O-ring Seal
‹› For the refrigerant lines
‹› Replace.
‹› Lubricate lightly with refrigerant oil before installing.
28
Refrigerant Line
