R8 Quattro Coupe V10-5.2L (BUJ) (2010)
1
Screw
‹› Tightening specification 25 Nm.
2
Refrigerant Line
‹› From the reservoir to the A/C compressor.
3
O-ring Seal
‹› Replace.
‹› Lubricate lightly with refrigerant oil before installing.
4
A/C Compressor
‹› V8 engine, removing and installing, refer to => [ Compressor ] See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Compressors. Vehicles with V10 engine, refer to => [ Compressor ] See: Heating and Air Conditioning/Compressor HVAC/Service
and Repair/Compressors.
5
Refrigerant Line
‹› From the A/C compressor to condenser 1 (left).
‹› With a branch to the high pressure side service connection.
6
Screw
‹› Tightening specification 22 Nm.