R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Place pressure line center section - 1 - on threaded pin - 3 - with clip - 2 -.
-
Secure pressure line center section - 1 - on body - 4 - with line bracket - 5 - and bolt - 6 -.
Pressure Line and Return Line Bracket to the Body
-
Secure the line bracket - 2 - to the body with the bolt - 8 - and nut - 1 -.
-
Insert the return line - 5 - and pressure line - 6 - in the mount - 3 -.
-
Secure the mount - 3 - on the line bracket - 2 - with the tab - 4 - and nut - 7 -.
Assembly of the Pressure Line Rear Section on the Body