R8 Quattro Coupe V10-5.2L (BUJ) (2010)
2
Nut
‹› 8 Nm
3
Clamp
4
Bolt
‹› 8 Nm
5
Bracket
6
Bracket
7
Bolt
‹› 8 Nm
8
Hydraulic Oil Cooler
‹› Removing and installing, refer to => [ Hydraulic Oil Cooler ] See: Steering and Suspension/Steering/Power Steering/Power Steering Fluid
Cooler/Service and Repair.
‹› Bleed the steering. Refer to => [ Steering System, Bleeding after Replacing ] See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair.
‹› Check hydraulic fluid level. Refer to => [ Power Steering, Checking Fluid Level ] See: Steering and Suspension/Steering/Testing and
Inspection/Component Tests and General Diagnostics/Power Steering, Checking Fluid Level.
‹› Steering system, checking for leaks, refer to => [ Steering System, Checking for Leaks ] See: Steering and Suspension/Steering/Testing and
Inspection/Component Tests and General Diagnostics/Steering System, Checking For Leaks.
9
Bolt
‹› 2.5 Nm
10
Air Duct
11
Clamp
‹› Tension with the hose clamp pliers (V.A.G 1275) or locking pliers (VAS 6199).
‹› Always replace after removal.
12
Return Line
‹› From the power steering gear to the hydraulic oil cooler.
‹› Note the installation location on the steering gear. Refer to => [ Line Installation Location
on the Steering Gear ] See: Disassembly and Assembly/Front Lines and Hoses, Assembling.
‹› Note location on hydraulic oil cooler. Refer to => [ Front Lines and Hoses, Assembling ] See: Disassembly and Assembly/Front Lines and
Hoses, Assembling.
‹› Installation location on the body, refer to => [ Front Lines and Hoses, Assembling ] See: Disassembly and Assembly/Front Lines and Hoses,
Assembling.
13
Return Line, Front Section
‹› From the hydraulic oil cooler to the reservoir.
‹› Note location on hydraulic oil cooler. Refer to => [ Front Lines and Hoses, Assembling ] See: Disassembly and Assembly/Front Lines and
Hoses, Assembling.
‹› Installation location on the longitudinal member, refer to => [ Front Lines and Hoses, Assembling ] See: Disassembly and Assembly/Front