R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Loosen the clamp - 3 - and slightly pull the fuel filter to the rear.
-
Remove fuel line - 1, 2 - by pressing the release button.
-
Remove the fuel filter.
Installing
‹› Tightening specifications, refer to => [ Fuel Filter Assembly Overview ] See: Fuel Filter Assembly Overview.
Installation is performed in reverse order of removal, noting the following:
-
Push the sleeve - 5 - over the new fuel filter.
‹› Fuel filter installed position: The direction of flow is marked on filter housing with arrows.
‹› The sleeve must lie on the contact surfaces between the fuel filter and the fuel tank.