R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Wheel Bearing: Removal and Replacement
Wheel Bearing Housing, Wheel Bearing Unit, Suspension Strut, Coupling Rod and Stabilizer Bar
Assembly Overview
Wheel Bearing Housing, Wheel Bearing Unit, Suspension Strut, Coupling Rod and Stabilizer Bar Assembly Overview
1
Suspension Strut
‹› Removing and installing, refer to => [ Suspension Strut ] See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service
and Repair/Removal and Replacement/Rear Suspension/Suspension Strut.
‹› Installing the suspension strut, refer to => [ Suspension Strut ] See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Overhaul/Rear Suspension.
2
Nut
‹› 110 Nm
‹› Always replace after removal.
‹› Must be tightened in the curb weight position. Refer to => [ Wheel Bearing, Lifting to Curb Weight Position ] See: Procedures/Rear
Suspension.
3
Bolt
4
Bolt
‹› 60 Nm