R8 Quattro Coupe V10-5.2L (BUJ) (2010)
CAUTION!
Risk of burning.
‹› The heating control valve unit can be warm or even hot when the engine is cold because it is activated depending on the climatronic
control module (J255) temperature setting whenever the ignition is switched on.
-
Disconnect the electrical connector - D - on the heating control valve unit - E -.
‹› Disregard the other items.
-
Remove the center console.
-
Remove the parking brake lever.
-
Separate the wiring harness at the location marked - 5 -.
-
Connect the repair wiring harness - 4 - with the vehicle wiring harness.