R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Remove the nuts in sequence - 6 to 1 -.
-
Remove the right exhaust manifold and catalytic converter.
Installing
‹› Tightening specifications => [ Individual Components of Suspension,
Right Side ] See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and Repair/Exhaust Manifold Assembly Overview.
Installation is in reverse order of removal, note the following:
-
Mount the seal on the threaded pin.
-
Insert exhaust manifold in securing strips and tighten => [ Right Exhaust Manifold, Tightening
Specifications and Sequence ] See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and Repair/Exhaust Manifold Assembly
Overview.