R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Press the harness - 2 - off the base of the rear bulkhead using the (80 - 200) - arrows - and free it up.
-
Fold the insulation mats - 1 - on the right side of the vehicle to the side.
‹› The illustration shows the left side of the vehicle.
-
Remove the bolts - 1 - through - 4 - and the right locking flange cover.
‹› The locking flange cover is sealed with adhesive sealant.