R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Disconnect the fuel lines - 1, 2, 3 - on the inner side of the left locking flange by pressing the release button.
-
Disconnect the electrical connector - 4 - and - 5 - and remove the locking flange and sealing ring.
‹› Fuel level sensor 3 is illustrated without the fuel tank.
-
Reach into the fuel tank and remove the fuel level sensor 3 by pressing locking tabs at the same time - 1 - and - 2 - out of the baffle house guide -
arrow -.
‹› When removing, be sure not to bend floater arm of fuel level sensor 3.