R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Remove the hydraulic line threaded connector - 2 -.
-
Remove the hydraulic line threaded connection - 4 - to the clutch slave cylinder.
CAUTION!
There is a risk of destroying the hydraulic return line connection.
‹› Only remove the hydraulic return hose using the method described.
-
Remove the hydraulic return hose - 3 - from the R tronic shift actuator. Refer to => [ Hydraulic Return Hose ] See: Transmission and
Drivetrain/Manual Transmission/Transaxle/Gearshift Actuating System - M/T/Service and Repair/Removal and Replacement/Controls,
Housing/Removal and Installation/Hydraulic Return Hose.
-
Remove the bolts - arrows - and the R tronic shift actuator.
Install the shift actuator.
Tightening specifications: