R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Disconnect the electrical connector on the right locking flange - arrow -.
‹› Ignore - 1, 2 and 3 -.
-
Connect the (V.A.G 1348/3A) with (V.A.G 1348/3-3) with an adapter cable from the connector test set (V.A.G 1594C) at terminal - 1 -.
-
Using insulating tape, tape over the second terminal on the (V.A.G 1348/3-3) - arrow - to prevent a short circuit.
-
Connect terminal - 5 - with an adapter cable from (V.A.G 1594C) to chassis Ground (GND).
-
Connect the alligator clip to battery positive.
-
Remove fuel filler cap from fuel filler tube.
R8 Coupe
-
Remove the left engine compartment trim - 1 -.