R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Remove the nuts - 2, 4 and 5 -.
-
Remove the driver knee airbag - 3 - downward.
-
Lay the driver knee airbag so the padding faces up.
Installation
Installation is reverse of removal, but note the following:
CAUTION!
‹› Follow the safety precautions for pyrotechnic components.
‹› Before handling pyrotechnical components (for example, connecting electrical connector), the person handling them must "discharge
static electricity ". For example, by briefly touching the door striker pin.
‹› Ensure that electrical connections are pushed in as far as stop and engage with a click.
‹› Make sure the wires are not pinched.