R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Remove screws - 2 -.
-
Remove cover with upholstery from seat pan, refer to => [ Seat Pan Cover and Upholstery ] See: Body and Frame/Seats/Service and
Repair/Overhaul/Seat Upholstery, Covers/Seat Covers and Upholstery.
-
Open the guide clip - 8 -.
CAUTION!
Connectors - 3 - and - 7 - must not be separated.
-
Slide Seat Occupied Recognition Pressure Sensor (G452) - 4 - sideways from clip - 9 -.
-
Fold the cushion - 5 - upward.
‹› The cushion is included as part of the service kit.
‹› Clip - 4 - must not be separated.
‹› The hard foam insert in the crease is not included in the service kit.