R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Arm/Disarm Switch: Service and Repair
Trunk Lock/Alarm/Central Locking Switch
Removing
Proceed as follows:
-
Remove the front lid lock => [ Front Lid Lock ] See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch/Service and Repair/Front Lid
Lock.
-
Raise the retaining tab - 4 - - arrow A -.
-
Disengage the trunk lock/alarm/central locking switch (F124) - item 3 - in the - direction of arrow B - at the lid lock - 1 - and remove it.
Installing
Installation is reverse of removal, but note the following:
‹› The guides - 2 - on the trunk lock/alarm/central locking switch (F124) must be inserted correctly in the front lid lock.
-
Install the front lid lock => [ Front Lid Lock ] See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch/Service and Repair/Front Lid
Lock.