R8 Quattro Coupe V10-5.2L (BUJ) (2010)
All Vehicles:
-
Disconnect the connector - 1 -.
-
Remove the oil pressure switch (F1) - 2 -.
Installing
‹› Tightening specifications, refer to => [ Upper Engine Oil Cooler, Oil Check Valves and Spray Nozzle Valve Assembly Overview ] See: Engine,
Cooling and Exhaust/Engine/Engine Lubrication/Oil Cooler/Service and Repair/Upper Engine Oil Cooler, Oil Check Valves and Spray Nozzle
Valve Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace sealing ring.
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Install air filter housing.