R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Engine Speed Sensor: Service and Repair
Engine Speed Sensor
Removing
-
Remove the power steering pump.
-
Disconnect the connector - 2 -.
-
Remove the bolt - 1 - and the engine speed sensor (G28).
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening specifications, refer to => [ Component Location Overview ] See: Powertrain Management/Computers and Control Systems/Locations
-
Install the power steering pump.
A005R8013-190510