R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Steering Angle Sensor: Service and Repair
Steering Angle Sensor
Removing
-
Remove steering column trim.
-
Remove return spring with slip ring. Refer to => [ Airbag Spiral Spring/Return Spring With Slip Ring ] See: Restraint Systems/Air Bag
Systems/Clockspring Assembly / Spiral Cable/Service and Repair.
-
Remove steering angle sensor (G85) - arrow -.
Installing
Install in reverse order of removal, observing the following:
-
After replacing the steering angle sensor, adapt it in Guided Fault Finding.