R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1517002.png)
-
Remove the 12 V socket from the mount.
-
Disconnect the electrical connector.
Installing
Install in reverse order of removal, observing the following:
-
Remove the support - 1 - on the (T40148).
-
Slide the piston down and hold it in place.
-
Rotate the thumb wheel - 4 - on the (T40148) counterclockwise - arrow -. This loosens the release tabs - 2 - on the 12V socket- 3 - so the
(T40148) can be removed.
