R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Release the retaining springs - A arrows - and remove the vehicle electrical system control module (J519) - item 1 - upward out of the relay and
fuse panel - arrow B -.
Vehicles from 06.09
-
Release the spring - arrows A - and remove the vehicle electrical system control module (J519) to the left from the relay and fuse panel - arrow B
-.
All Vehicles
-
Unclip fuse panel on relay carrier.
-
Detach relays and control modules and then unclip appropriate relay carrier.
Installing
‹› Tightening specification, refer to => [ Front Relay Carrier and Fuse Panel Assembly Overview ] See: Front Relay Carrier and Fuse Panel