R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Secure the rear line bracket - 4 - to the body - 5 - with bolts - 3 -.
-
Secure the power steering gear/hydraulic oil cooler return line - 1 - to the rear line bracket - 4 - with the clamp - 2 - and nut - 8 -.
-
Secure the hydraulic oil cooler/reservoir return line - 6 - to the rear line bracket - 4 - with the clamp - 7 - and nut - 8 -.
-
Secure the front line bracket - 10 - to the body - 12 - with bolts - 9 -.
-
Insert the power steering gear/hydraulic oil cooler return line - 1 - in the clip - 11 - and secure it on the front line bracket - 10 -.
-
Insert the hydraulic oil cooler/reservoir return line - 6 - in the clip - 13 - and secure it on the rear line bracket - 10 -.
Installation Location on the Hydraulic Oil Cooler