R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Note the installation location on the threaded connection. Refer to => [ Installation Location on the
Threaded Connection ] See: Disassembly and Assembly/Center Lines and Hoses, Assembling.
4
Union Nut
‹› 40 Nm
5
Pressure Line, Center Section
‹› From the power steering pump to the power steering gear.
‹› Note the installation location on the threaded connection. Refer to => [ Installation Location on the
Threaded Connection ] See: Disassembly and Assembly/Center Lines and Hoses, Assembling.
6
Nut
‹› 4.5 Nm
7
Retaining Tab
8
Bracket
‹› Installed in the coupe.
9
Bolt
‹› 8 Nm
10
Pressure Line, Front Section
‹› From the power steering pump to the power steering gear.
‹› Note the installation location on the threaded connection. Refer to => [ Installation Location on the
Threaded Connection ] See: Disassembly and Assembly/Center Lines and Hoses, Assembling.
‹› Note the installation location on the power steering gear. Refer to => [ Line Installation Location
on the Steering Gear ] See: Disassembly and Assembly/Center Lines and Hoses, Assembling.
11
Seal
‹› Always replace after removal.
12
Return Line
‹› From the power steering gear to the hydraulic oil cooler.
‹› Note the installation location on the power steering gear. Refer to => [ Line Installation Location
on the Steering Gear ] See: Disassembly and Assembly/Center Lines and Hoses, Assembling.
‹› Note location on hydraulic oil cooler. Refer to => [ Installation Location on the
Hydraulic Oil Cooler ] See: Disassembly and Assembly/Center Lines and Hoses, Assembling.
‹› Installation location on the longitudinal member. Refer to => [ Front Lines and Hoses, Assembling ] See: Disassembly and Assembly/Front
Lines and Hoses, Assembling.
13
Banjo Bolt
‹› Always replace after removal.
‹› 47 Nm
14
Power Steering Gear
‹› Removing and installing, refer to => [ Power Steering Gear ] See: Steering Gear/Service and Repair/Removal and Replacement/Power
Steering Gear.