R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Power Steering Pump: Service and Repair
Power Steering Pump Drive Seal
Power Steering Pump Drive Seal
Special tools, testers and auxiliary items required
‹› Thrust Piece (T40194)
‹› Seal Puller (T40195)
Procedure
-
Remove the power steering pump.
-
Rotate the spindle on the (T40195) all the way back.
-
Lubricate the seal remover threaded head, position it, and then install it into the shaft seal as far as possible using strong force.
-
Rotate the inner section of the seal puller against the spur gear unit the shaft seal is removed.
‹› If the shaft seal breaks, position the seal puller a second time and remove the rest of the seal.
-
Clamp the seal puller in a vise at the hex bolt and remove the shaft seal with pliers.
-
Clean running and sealing surface.