R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Steering Gear: Removal and Replacement
Power Steering Gear
Power Steering Gear
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
‹› 38 mm open end wrench insert (V.A.G 1332/8)
‹› Locking pliers (VAS 6199)
‹› Always replace self-locking nuts and bolts.
‹› Welding or straighten work on any steering components is not permissible.
‹› Only use steering gear grease to lubricate the steering rack.
1
Tie Rod End
‹› Removing and installing, refer to => [ Tie Rod Ball Joint ] See: Tie Rod/Service and Repair/Tie Rod Ball Joint.
‹› Check dust caps for damage and correct seating.
2
Lock Nut
‹› 50 Nm