R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Control Arm Bushing: Service and Repair
Front Suspension
Upper Transverse Link Bonded Rubber Bearing
Special tools, testers and auxiliary items required
‹› Assembly tool (T10254)
‹› Assembly tool (T10205)
‹› Tube (3296)
‹› Press piece (T10353)
‹› Hydraulic cylinder (VAS 6178)
‹› Hollow piston cylinder (VAS 6179)
‹› Remove upper transverse link. Refer to => [ Upper Transverse Link with Retaining Bracket ] See: Service and Repair/Front Suspension/Upper
Transverse Link With Retaining Bracket.
Press the bonded rubber bearing out of the upper transverse link.
Order the special tools as illustrated.
1. Spindle (T10254/5)
2. Nut (T10254/4)
3. Hydraulic cylinder (VAS 6178)
4. Washer (T10205/4)
5. (3296)
6. Upper control arm
7. (T10353)
8. Not in figure, (VAS 6179)
-
Press the bonded rubber bearing out of the upper transverse link while ensuring that the (T10353) does not tilt.
Press the bonded rubber bearing into the upper transverse link.