R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
To ensure a flat surface for the sleeve (T10254/3), the seam - arrows - on the transverse link may need to be removed with a file.
‹› Prior to pressing in the bonded rubber bearing, a commercially available washer - 2 - must be inserted in the thrust piece (3288/2) - 1 -.
1. (3288/2)
2. Washer, dimension - a - = approximately 12 mm, dimension - b - = approximately 40 mm, dimension - c - = 3 mm
Order the special tools as illustrated.