R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Suspension Strut / Shock Absorber: Removal and Replacement
Upper Transverse Link With Retaining Bracket and Suspension Strut Assembly Overview
Upper Transverse Link with Retaining Bracket and Suspension Strut Assembly Overview
1
Suspension Strut
‹› Removing and installing, refer to => [ Suspension Strut ] See: Suspension Strut
‹› Installing the suspension strut, refer to => [ Suspension Strut ] See: Overhaul/Front Suspension.
‹› Installation location of suspension strut, conventional shock absorber, refer to => [ Installation Location of Suspension
Strut, Conventional Shock Absorber ] See: Suspension Strut.
‹› Suspension Strut, Audi magnetic ride, installation location, refer to => [ Suspension Strut, Audi Magnetic
Ride, Installation Location ] See: Suspension Strut.
2
Bolt
3
Nut
‹› 110 Nm
Adjust torque wrench (V.A.G 1332) to 82 Nm when tightening nut.
This torque specification applies only in conjunction with Insert Tool (T40037).
‹› Always replace after removal.