R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Remove disc brake.
-
Remove or detach the brake shield from the wheel bearing housing.
-
Loosen nuts - 1 - and - 2 - but do not remove them.
-
Loosen the tie rod end nut - 1 - but do not remove it.
-
Press off track rod ball joint from wheel bearing housing using (3287A) and now unscrew nut.
-
Press the upper transverse link off the wheel bearing housing using the (3287A) and remove the nut.