R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Always replace after removal.
33
Bracket
‹› For the left rear ABS wheel speed sensor (G46)/right rear ABS wheel speed sensor (G44) wiring harness.
34
Bolt
‹› 9 Nm
35
Wheel Bearing Housing
‹› Different versions.
‹› Removing and installing, refer to => [ Wheel Bearing Housing ] See: Rear Knuckle/Service and Repair/Rear Suspension.
36
Nut
‹› 110 Nm
‹› Always replace after removal.
‹› Must be tightened in the curb weight position. Refer to => [ Wheel Bearing, Lifting to Curb Weight Position ] See: Procedures/Rear
Suspension.
37
Upper Control Arm