R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Shift Actuator - M/T: Service and Repair
Shift Actuator, R Tronic
Shift Actuator, R Tronic
Special tools, testers and auxiliary items required
‹› Oil Collecting and Extracting Device (V.A.G 1782)
‹› Hand drill with plastic brush insert
‹› Protective glasses
‹› Sealant (AMV 174 004 01)
Removing
CAUTION!
There is a risk of injury. The pressure in the R tronic hydraulic system may be up to 50 bar.
‹› Always reduce system pressure first before working on the R tronic hydraulic system => [ Hydraulic System, R Tronic, Building
System Pressure ] See: Manual Transmission/Transaxle/Gearshift Actuating System - M/T/Service and Repair/Procedures.
‹› When installing, bring all cable ties back to same positions.
-
Move the selector lever into "N".
-
Remove the air ducts - 1 - and - 2 -.
-
Remove the front noise insulation - 2 -.