R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1121004.png)
‹› Depending on the version, a strainer is still installed in front of Gear Selection Valve 1 (N284) (refer to => [ (Item 30) Strainer ] See: Description
and Operation). The auxiliary strainer cannot be installed on vehicles without the strainer because the shift actuator is different on the R tronic.
-
Bleed clutch system. Refer to => [ Clutch System, Bleeding ] See: Clutch/Clutch Hydraulic System/Service and Repair/Procedures/Clutch System,
Bleeding.
-
Install the air filter housing.
-
Install the engine compartment trim.
