R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Replace the O-ring - 2 -. Coat the new O-ring with brake fluid and install it on the hose/line assembly connection - 3 -.
-
Insert mounting bracket - 1 - and tighten nuts - 2 -. Tightening specification => [ (Item 10) Nut ] See: Clutch Pedal Assembly/Service and
Repair/Description and Operation.
-
Press the hose/line assembly - 3 - onto the master cylinder connection until the securing clip - 1 - engages audibly.
-
Verify by pulling on hose/line assembly.
-
Connect the connector to the Clutch Pedal Switch (F36).