R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Clutch Master Cylinder: Service and Repair
Master Cylinder
Master Cylinder
The master cylinder can only be removed when the mounting bracket is removed. Refer to => [ Clutch Pedal and Master Cylinder Mounting Bracket ]
See: Clutch Pedal Assembly/Service and Repair/Removal and Installation/Clutch Pedal and Master Cylinder Mounting Bracket.
Special tools, testers and auxiliary items required
‹› Pliers (T10005)
‹› Assembly tool (T10178)
‹› Grease (G 000 450 02)
-
Remove the mounting bracket. Refer to => [ Clutch Pedal and Master Cylinder Mounting Bracket ] See: Clutch Pedal Assembly/Service and
Repair/Removal and Installation/Clutch Pedal and Master Cylinder Mounting Bracket.
-
Release actuator rod mounting clip in clutch pedal with Pliers (T10005).
-
Place a spacer - A - between the clutch pedal and the stop and press the clutch pedal forward.