R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Clutch Slave Cylinder: Service and Repair
Clutch Slave Cylinder With Release Bearing, Manual Transmission
Clutch Slave Cylinder with Release Bearing, Manual Transmission
Special tools, testers and auxiliary items required
‹› Thin Insulating Band
‹› Clutch slave cylinder and release bearing are one unit and can only be replaced together.
Removing
Proceed as follows:
‹› Transmission removed.
CAUTION!
There is a risk of damaging the input shaft seal.
‹› Wrap the input shaft splines with thin insulating tape - arrow -.
-
Remove bolts - arrows -.
-
Carefully remove the clutch slave cylinder with release bearing.
Installing