R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1132003.png)
-
Tighten the bolts - arrows - in 2 stages => [ (Item 1) Bolt ] See: Manual Transmission/Transaxle/Gearshift Actuating System - M/T/Service and
Repair/Removal and Replacement/Clutch.
-
Remove the insulating tape.
-
Fill the R tronic hydraulic unit oil. Refer to => [ Oil Level in R Tronic Hydraulic Unit, Adjusting ] See: Manual Transmission/Transaxle/Gearshift
Actuating System - M/T/Manual Trans Hydraulic Fluid/Service and Repair/General Information.
