R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal and Master Cylinder Mounting Bracket
Clutch Pedal and Master Cylinder Mounting Bracket
Special tools, testers and auxiliary items required
‹› Hose Clamps up to 25 mm dia. (3094)
‹› Locking Tool (T10265)
Removing
‹› During the following procedures, make sure no brake fluid enters the plenum chamber or footwell. If this happens, these areas must be cleaned
thoroughly.
‹› Use cloths to protect the components from brake fluid.
-
Clamp off supply hose to master cylinder with a Hose Clamps up to 25 mm dia. (3094).
-
Disconnect the return hose on the master cylinder - arrow -.
-
Slide driver's seat as far to the rear as possible and set steering wheel to the highest position.