R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1161002.png)
-
Position the Puller (T10055) with the Adapter (T10055/3) and Kukko 21/4 internal puller on the driveshaft front ball bearing - 1 - as shown in the
illustration.
-
Drive out the driveshaft ball bearing.
Installing
Driveshaft rear ball bearing
-
Install the rear ball bearing - 2 - on the driveshaft as far as the stop using a 36 mm Socket (T10125).