R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Flywheel: Service and Repair
Flywheel Assembly Overview
Flywheel Assembly Overview
‹› For assembly work, secure the engine and bracket for the 10-cylinder FSI (VAS 6095/1-10) to the engine/transmission holder (VAS 6095) => [
Engine, Securing to Engine and Transmission Holder ] See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine, Securing to Engine and Transmission Holder.
1
Bolt
‹› Replace
‹› 60 Nm plus an additional 90° turn
2
Starter Ring Gear
‹› For engine speed sensor (G28)
3
Bolt
‹› 12 Nm
4
Flywheel
‹› Removing and installing, refer to => [ Flywheel ] See: Flywheel
5
Crankshaft Shaft Seal, Transmission Side