R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Installing
‹› Tightening specifications. Refer to => [ Shift Actuator, R Tronic Assembly Overview ] See: Description and Operation.
Install in reverse order, paying attention to the following:
-
Replace the O-rings for (N255), (N285), (N286):
1. Black O-ring
2. Green O-ring
3. Black O-ring
4. Green O-ring
‹› Note the different diameters.
-
Replace the Gear Selection Valve 1 (N284) O-ring:
1. Brown O-ring
2. Green O-ring
3. Black O-ring
‹› Note the different diameters.