R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Hydraulic Control Unit - M/T: Service and Repair
Description and Operation
Hydraulic Unit, R Tronic Assembly Overview
CAUTION!
There is a risk of injury. The pressure in the R tronic hydraulic system may be up to 50 bar.
‹› Always reduce system pressure first before working on the R tronic hydraulic system => [ Hydraulic System, R Tronic, Building
System Pressure ] See: Service and Repair/Procedures.
1
Hydraulic pressure line
‹› Depending on vehicle, there are different versions and tightening specifications
‹› Refer to => [ Hydraulic Pressure Line from Shift Actuator to R Tronic Hydraulic Unit ] See: Service and Repair/Removal and
Replacement/Controls, Housing/Removal and Installation/Hydraulic Pressure Line From Shift Actuator to R Tronic Hydraulic Unit
2
Bolt
‹› 24 Nm
3
O-ring
‹› Replace
4
Connectors on the R tronic shift actuator
CAUTION!