R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Manual Trans Hydraulic Fluid: Service and Repair
General Information
Oil Level in R Tronic Hydraulic Unit, Adjusting
Special tools, testers and auxiliary items required
‹› Vehicle Diagnosis and Service System (VAS 5052)
Procedure
-
Body Protectors, Installing. Refer to => [ Body Protectors, Installing ] See: Service and Repair/Removal and Replacement/Body Protectors,
Installing.
-
Remove the air filter housing.
-
Remove the bolts - arrows - and remove the heat shield over the R tronic hydraulic unit.
‹› The illustration shows the installation position with the transmission removed.
Test Conditions
‹› Move vehicle onto a lifting platform or over a work pit so that it stands absolutely horizontal.
‹› The engine is switched off.
‹› The Vehicle Diagnosis and Service System (VAS 5052) is connected.