R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› The inspection surface can be viewed without removing the air filter housing, for example using a flashlight.
‹› Specification: The inspection surface - arrow - on the reservoir - A - must lie completely in the oil. The surface appears green.
‹› The illustration shows the transmission removed.
‹› Do not open the sealing cap - 1 - under any circumstances.
‹› If the specified value is reached and the oil level in the hydraulic system is correct, the test can be ended.
‹› If the specified value is not reached or the surface appears white, the oil level in the R tronic hydraulic unit must be corrected. Refer to => [ Oil
Level in R Tronic Hydraulic Unit, Adjusting ] See: General Information.